How to Tell if Your Washing Machine Belt Needs Replacing | Common Symptoms

How to tell if your washing machine belt needs replacing

It is hard to imagine a home without any washing machine. I mean, we need this tool in our everyday life.

Though renowned brands are bringing direct driven smaller washing machines to the marketplace, the indirect or belt-driven machines are still holding the number one position. People like a belt-driven washer for various reasons. First of all, these kinds of appliance create less noise and have more stability. Additionally, a belt-driven machine needs low maintenance cost.­

However, most of the belts are sensitive to the temperature, oil and humidity. So, there might be a chance of belt failure that can cause serious harm to your expensive machine. Moreover, repairing that damaged machine or buying a new machine is not always an easy solution.

I bet you’re wondering how to tell if your washing machine belt needs replacing.

The good news is there are several methods of identifying the current condition of a belt so that you can keep or change the belt when needed.

So, I am here to guide you throughout the whole process of pointing out the sign of a bad washing machine belt.

How Do I Know if My Washing Machine Belt Needs Replacing: Some Common Symptoms & Tips

When any of our body parts get injured or damaged the whole body reacts to it. As a result, our body can’t behave normally. The exact same thing happens to a machine when any inner or outer parts of it get damaged.

Additionally, a damaged belt causes some problem which hampers the normal behavior of a washer. However, minor problems of the belt can be solved using old household techniques while serious problems lead to alteration of the belt. Here I am going to discuss some signs which indicate that a belt needs to be substituted.

But, do you know what exactly the washing machine belt is? Let’s See

Know the Basics About Washing Machine Belt

Usually, a washing machine needs one belt to shift power from the motor to the pump and transmission. But, some models are designed with 2 belts for transmission and operating the pump smoothly.

You can find the belt inside the machine. Especially, the belt stays between the drum pulley and the motor. This portion allows the barrel to rotate during a wash cycle.

Symptoms of a Bad Washing Machine Belt

Now we are going to talk about the question on “how do I know if my washing machine belt needs replacing?”

Here, we will discuss some very common symptoms of identifying a faulty belt.

Noisy Sound

 Usually, washing machine creates moderate sound while washing clothes. But, if you hear any odd or strange sound you should check the belt. So, it is recommended that you should stay near the machine at the time of washing.    

Burning Smell

Another symptom of a bad belt is that you will feel burning smell coming from the machine. So, every time you wash your clothes, you should check if there any burning smell or something 

Awkward Rotation of the Drum

The drum is located inside the machine which holds your clothes. The belt of the washing machine helps the drum to rotate smoothly. If you notice that the drum is not operating properly, you should immediately check the belt.

No Resistance

If you switched off the machine and try to rotate the drum manually, you may feel some resistance caused by the belt. If you find no resistance then there is something wrong with the belt.  

Notice Agitations

When water enters into the drum, you should check if the machine agitates or not. If the belt is faulty or damaged, the washer will not agitate. However, motor or transmission drive could be defected or broken which is not helping the belt to spin.

Water Pumping

Sometimes you may observe the agitations of the machine but it is not pushing up the water. This is also a sign of a faulty belt and you need to replace it straight away.

Inspect Tension

Open the machine and remove the access panel to check the belt’s condition, look over it for appropriate tension. Slightly put pressure in the middle of the belt, it should deflect maximum one or one and a half-inch. If the belt does not respond to the given pressure, then the belt must be faulty.

Belt Condition

You must physically check the belt condition for frayed edges, crack or other signs of fault. If it is deteriorated or worn, it should be altered. Moreover, a loose belt can be fixed by shifting the motor position but a stretched belt must be changed.

how do I know if my washing machine belt needs replacing?

Tips and Precautions

  1. If you don’t feel secure checking faults of the washing machine by yourself, then take help from an expert to check the issue for you.
  2. Make sure that your washing machine is not connecting to the power source while checking the faulty belt
  3. Use gloves while testing out the above-mentioned steps
  4. Never use low-quality cheap belts as a replacement

To Sum up

Finding out the current condition of a washing machine belt is not that difficult and those who are facing serious belt-related problems should install a new belt as soon as possible. It may cost you some money and time. But, your appliance will provide long-lasting performance.

So, I think, with the help of this guide, now you have acquired a very clear knowledge about how to tell if your washing machine belt needs replacing.

Leave a Comment